-
Tanks & Ponds
-
Flow & Usage
-
Pump Monitoring & Control
-
Valve Control
When Water Matters, Blind Spots Become Expensive
A farm water network can cover a wide area and include multiple storage points, pumps, flow meters and supply lines.
Without a live view of the system, problems are often discovered only when a tank is low, stock water is interrupted or someone has already travelled out to investigate.
-
Storage shortfalls
A tank or pond can fall faster than expected, leaving less time to identify the cause or protect supply.
-
Leaks and abnormal use
Unusual flow can continue unnoticed, wasting water and potentially signalling a larger network problem.
-
Pump problems
Unexpected pump activity - or a pump that fails to run - may not be obvious until downstream supply is affected.
-
Time-consuming checks
Driving between water assets consumes time and fuel that can often be avoided with remote monitoring.
One Clear View Across Your Farm Water Network
Water to Grow brings remote control, monitoring and alerts into one platform. See current status, review history and respond earlier when storage, flow or equipment moves outside the limits you have set.
The solution is modular. Start with the tanks, ponds, pumps, flow points or valves that create the greatest operational risk, then extend coverage as required.
Better Visibility. Earlier Warning. Less Running Around.
-
Tanks and Ponds
Know what water you have
Track storage levels and usage, estimate when water may run low, and receive alerts before levels become critical.
-
Flow and Water Usage
See how water is moving
Monitor flow and daily totals, compare usage over time and identify unusual demand.
-
Pump Monitoring
Know whether pumps are operating
See when pumps are operating and review their history to investigate problems.
-
Pump Control
Control without travelling
Switch or schedule selected pumps remotely through the Water to Grow platform.
-
Isolation Valve Control
Manage supply and fault finding
Remotely open or close selected valves to manage supply, support maintenance and help locate problems.
-
Alerts and Shared Visibility
Keep the right people informed
Receive mobile or SMS alerts when storage, flow or equipment moves outside configured limits. Give authorised staff a shared view of current conditions and alert history.
Start With the Parts of Your Water Network That Matter Most
Every farm water system is different. You may need visibility of one critical tank, a series of storage points, a pump that supplies stock water, or flow across a wider reticulation network.
Water to Grow can be configured around those priorities. Begin with the assets where a failure or shortfall would have the greatest impact, without installing every available module from day one.
Built for Real Farm Water Networks
Water to Grow supports a wide-range of farms and rural operations where water availability, infrastructure reliability and timely information matter.
-
Dairy and livestock
Monitor stock-water storage, pump activity, flow and supply infrastructure across distributed farm networks.
-
Horticulture and cropping
Keep visibility across storage, water movement and critical pumps supporting productive growing systems.
-
Rural water schemes
Create a shared view across selected storage, flow and isolation points to support supply management and maintenance.
Be Ready for a Drier Season
When water demand rises or supply becomes less certain, earlier visibility of storage, usage and equipment problems becomes more valuable.
Read more: Is your irrigation system ready for El Nino?
Talk to Us About Your Farm Water System
Tell us what you need to monitor or control, and we’ll help identify the most useful starting point for your farm water network.
Water to Grow provides practical monitoring and control solutions for farm water infrastructure across New Zealand.
Prefer to speak with someone? Call +64 3 348 8190 or email info@watertogrow.com.